22
'11
Written on
CIAT
21
'11
Written on
EMCO GmbH
The new EMCO VERTICAL VT 250 in two additional versions: Vertical Turning machine with integrated automation in European quality
EMCO introduces the maximum version of the EMCO Vertical VT 250 with driven tools, Y axis and hollow spindle drive. Thus EMCO - in cooperation with EMCO Magdeburg - enlarges its product range with two additional versions of the VT 250: VT 250 M (ISM) with driven tools and hollow spindle drive and the VT 250 MY (ISM) with a Y axis on top. Equipped with a hollow spindle drive instead of a belt drive the new two versions perform with a drive power of 29 kW. The VT 250 MY with Y axis offers a travel of 180(+/-90) mm and can stand any competition - not only in regard to the price.
18
'11
Written on
Keyence France
XG-7000
This is without doubt the most complete vision system on the market. Already at top performance levels for speed, resolution, stability and the range of software tools, the XG-7000 Series can now also be programmed in a PC environment. The calculating power is located in a controller dedicated to image processing and not in a PC, thus avoiding problems of overloading and maintainability. This vision system combines flexibility, stability, and performance with simplicity. It can be used by all, for all applications.
16
'11
Written on
STAHL
Sunlight readable displays for explosion-protected HMI systems
The PC-based, explosion-protected operating systems from the Open HMI series can now, on request, be fitted with innovative 15" displays that reduce glare and reflections to a minimum. The displays of these models can be read easily even in bright sunlight, since a filter pack effectively diverts even strong incoming ambient light. The new solution is based on a very effective combination of polarisation filters placed on top of and behind one another in front of the display.
15
'11
Written on
SIC Marking
C 151 z-a marking machine for the aeronautics market
The C151 z-a series attracted a great deal of attention when it was introduced at the latest AEROMART show, held recently in Toulouse. With its autosensing capability, this marking machine is particularly targeted at the aeronautics industry, offering good repeatability and traceability.
11
'11
Written on
Jetter
Graphics-capable HMI for harsh environments
The Ludwigsburg-based automation specialist Jetter AG has launched its new JVM-407 graphics-capable HMI, designed especially for use in harsh environments.
11
'11
Written on
SOURIAU – SUNBANK Connection Technologies
SOURIAU’s 851 range (Mil DTL 26482 series I), now available in an RoHS version with QPL accreditation
SOURIAU’s black Zinc Nickel version enables users of industrial and aeronautical equipment to comply with the latest RoHS directives. It can guarantee the same electrical and physical characteristics as the cadmium solution, particularly in terms of salt spray resistance (500 hours). In addition, an RoHS Zinc Nickel 851 connector can be mated with a cadmium connector without generating a galvanic couple; the same is true of accessories such as adaptors.
10
'11
Written on
SOURIAU – SUNBANK Connection Technologies
SMS IP
To meet the growing demand for small waterproof connectors for on-board railway equipment, SOURIAU has developed a special connector: the SMS IP. Designed to meet railway standards, the SMS IP combines compactness and safety: IP 67 sealing, operating voltage up to 500 V and compliance with the most demanding fire and smoke standards. SMS IP is intended for on-board applications such as lighting, door controls, detectors, air conditioning programmes, the SMS cabs etc..
09
'11
Written on
REDEX
REDEX – The Machine Tool Drive Company
Hi-tech reducers for rack & pinion machine axis and milling spindles
08
'11
Written on
PEPPERL+FUCHS FACTORY AUTOMATION
